Grinding Finish(No.3/No.4/No.5/No.6)

Starlight is one kind of embossed stainless steel finish with non-directional, reflective and uniformly textured. Because of its high consistency, it's excellent suitable for panel-to-panel matching, which is widely used for exterior and interior of architectural, such as wall panels, elevator panels, escalator, coping and trim. Regular coils are typically supplied with an inner diameter of 508 / 610mm Special dimensions was accepted on request Customized specific strip are acceptable Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

As a professional PVD coating stainless steel supplier, we offer PVD-coated stainless steel for customers to choose from. Our PVD coating stainless steel, with physical Vapor Deposition (PVD), is a process to produce a metal vapor (titanium, chromium, and aluminum) that can be deposited on electrically conductive materials as a thin highly adhered pure metal or alloy coating. The process is carried out in a vacuum chamber using a cathodic arc source. The coating compounds are made up of various elements such as carbides, nitrides, borides, and silicide. A wide variety of colors can be achieved by adding different gases during the deposition. WHY CHOOSE PVD COATING? PVD coating is one of the best methods for enhancing thin film plating elements. The vacuum deposition method coats the product with a film of 0.1-0.3 microns thick. PVD coatings surpass traditional electroplated coatings, it's more corrosion resistant and has superior hardness. PVD coatings do not discolor or tarnish and do not suffer under UV radiation so easily. More environmentally friendly than traditional coating processes such as electroplating or painting. WHY CHOOSE STANCH PVD COATING? Our PVD coated stainless steel use Stanch innovative new techniques to make the PVD-colored coats much harder and more durable than others. The general coating deposition method coats the product with a film of 0.1-0.2 microns thick, but we make it thicker for better wear, scratch, and corrosion resistance making its durability superior to general coating methods such as electroplating or other PVD processes. Stanch new PVD technique can be achieved a smooth PVD coat with good scratch resistance compared to other PVD processes as well.   PVD can be coated on all kinds of stainless steel finish, but usually apply to finer finish such as Super Mirror (No.8), Bead Blasted, Hairline, Starlight, Linen..... it's widely used for architectural and decorative applications, such as wall panels, coping and trim, also artistic objects. If you are interested in our PVD coated stainless steel, just feel free to contact Stanch! Special dimensions was accepted on request Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request AVAILABLE COLOR Champagne, Gold, Coffee, Copper, Black, Carbon Black We are continuously researching and developing the process to add more colors. If there is a particular color that you¡¦re interested in developing, please don¡¦t hesitate to contact us. Champagne   Gold   Coffee   Copper   Black   Carbon Black

What is hairline finish? Hairline was the surface with endless brushing lines extend uniformly along with the length of coil or sheet. Hairline brushed finish's a well-defined directional finish with long and fine line which is also called HL, Long-Grain finish or Long-Grit finish. It's widely used in elevator panels, lift cabins and entrance, escalators, automotive sector, interior cladding, building facades and other architectural applications. Regular coils are typically supplied with an inner diameter of 508 / 610mm Special dimensions was accepted on request Customized specific strip are acceptable Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

Checker plate, also known as diamond plate or tear plate. It was composed with regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. It¡¦s normally made by No.1, but also can be made by other finish like 2B or 2D. The added texture reduces the risk of slipping making checker plate a solution for stairs, catwalks, walkways and ramps. It can also be used for interior decoration. Special dimensions was accepted on request Customized specific cut-to-length are acceptable

2D is a dull, silver gray and non-reflective finish which results from cold rolling followed by annealing and descaling, and may perhaps get a final light roll pass through unpolished rolls. It's widely used in the industry that may not concern the uniform of the finish. Regular coils are typically supplied with an inner diameter of 508 / 610mm Special dimensions was accepted on request Customized specific strip are acceptable Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

Stanch provides bright annealed stainless steel sheets for customers to use in different applications. BA (bright annealed) is the abbreviation of Bright Annealed, which is produced by heat-treating in a controlled atmosphere furnace. It's a smooth, bright reflective finish, has a mirror-like appearance but may have some cloudiness and other imperfections. BA can be buffed to attain Super Mirror (No.8) which is much brighter than BA. It's often specified for the applications that need highly reflective finish like architectural components, food processing equipment, and other general applications. We have the capability to offer high-quality bright annealed stainless steel sheets according to the demands of customers. If you are interested in our bright annealed finish products, just feel free to contact us! Regular coils are typically supplied with an inner diameter of 508 / 610mm Special dimensions was accepted on request Customized specific strip are acceptable Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

2B is a smooth, moderately reflective cold rolled finish commonly produced in the same manner as 2D, except that the final light cold rolling pass is done by using polished rolls. 2B is the most economical and widely used stainless steel finish. It's especially common in industrial, chemical and food processing applications. Regular coils are typically supplied with an inner diameter of 508 / 610mm Special dimensions was accepted on request Customized specific strip are acceptable Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

CD Overlay, which was also called Circle CD. It is a patterned polished finish which was applied mechanically to the surface and create consistent circle patterns, which is designed to create various visual effects. It's widely used in architectural and decoration application such as wall panels, cabs, coping and trim. Special dimensions was accepted on request Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request