Hairline Stainless Steel

Etched patterns are created by selectively applying a protective acid resistant film to appointed areas and acid etching the unprotected areas. The etching removes a thin layer of stainless steel, changes the color to a dull silver gray, and roughens the surface, which can be contrasted with grinding, super mirror or other finishes to create thousands of variations. Etched finish also can be colored before or after etching. It was widely used for decoration applications, such as elevator doors, wall panels, coping and trim. Special dimensions was accepted on request Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request Stanch is one of leading cold rolled stainless steel companies based in Taiwan. We can offer kinds of surface finishes. If you are interested, please do not hesitate to contact our service team with your specific request.

Grinding finish which is known as brushed finish, also called as directional or Satin. It's an unidirectiona brushing finish obtained with 150/180/240/320 grit abrasive, it was characterized by short, parallel brushing lines that are uniform and direction in appearance, which extend uniformly along the length of the coil or sheet and generally used where lower reflectivity or gloss is required. Stanch are able to apply both wet grinding or dry grinding upon customer requirement, which was gave the stainless steel appearance in different flavour. Because of its durability, scratch resistance, and decorative nature function, grinding finishes are widely used for architectural decoration, public spaces, kitchen equipment, bathroom sinks, elevator panels, storefronts, food processing, dairy equipment, and also in automotive sector. Regular coils are typically supplied with an inner diameter of 508 / 610mm Special dimensions was accepted on request Customized specific strip are acceptable Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

CD Overlay, which was also called Circle CD. It is a patterned polished finish which was applied mechanically to the surface and create consistent circle patterns, which is designed to create various visual effects. It's widely used in architectural and decoration application such as wall panels, cabs, coping and trim. Special dimensions was accepted on request Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

Checker plate, also known as diamond plate or tear plate. It was composed with regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. It¡¦s normally made by No.1, but also can be made by other finish like 2B or 2D. The added texture reduces the risk of slipping making checker plate a solution for stairs, catwalks, walkways and ramps. It can also be used for interior decoration. Special dimensions was accepted on request Customized specific cut-to-length are acceptable

What is vibratory finishing? Vibration is not a highly reflective finish, has a uniform texture with random, multi-directional grit lines with highest degree of consistency, it's also called non-directional Satin and Angel Hair. Vibration is one of the most popular finishes because of its non-direction and high density scratch reacting incredible fine texture. The typical applications includes architectural and decoration such as wall panels, elevator, escalator, interior cladding, building facades, trim work, as well as signage and so on. Special dimensions was accepted on request Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

2D is a dull, silver gray and non-reflective finish which results from cold rolling followed by annealing and descaling, and may perhaps get a final light roll pass through unpolished rolls. It's widely used in the industry that may not concern the uniform of the finish. Regular coils are typically supplied with an inner diameter of 508 / 610mm Special dimensions was accepted on request Customized specific strip are acceptable Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request

Bead Blast finish was produced by the impact of a hard, inert medium onto the surface result in a non-directional, uniform matt surface with a soft satin reflection and low reflectivity. Bead Blast finish provides a clean, consistent, streak-free finish, making it extremely suitable for panel-to-panel matching. It's widely used in the food, beverage, medical, pharmaceutical industries, and decoration applications.? Stanch offers bead blasting stainless steel according to the demands of customers. Customized bead blasted stainless steel is acceptable. For more detail just feel free to contact us! Special dimensions was accepted on request Customized specific cut-to-length are acceptable PE/Laser PE/Optic Fiber Laser PE are available on request